bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Cruiser RV Stryker TT Toy Hauler


  • Pad For Stabilizer Jack With 5-3/4" Feet
  • The SnapPads # SN39FR that you referred to are 5-1/2" in size and your metal pads are 5-3/4", so your feet are too big for the pads. You will need the # SN99FR pads designed for metal feet 5-3/4" to 6". Please measure all 4 feet before ordering. It is not unusual for front and back feet to be different sizes.
    view full answer...

  • Is It Safe To Use a 2-1/2 Reducer Sleeve With The Reese Steadi-Flex Weight Distribution System?
  • Yes, you can use a Hitch Receiver Reducer Sleeve # C45405 safely with your Reese Steadi-Flex Weight Distribution System # RP66560. I do recommend using the Hitch Receiver Immobilizer # BX88312 as this will eliminate all the play with having the additional reducer being used. We only have the Reese Steadi-Flex weight distribution available with a 2" receiver shank. The only reason I would recommend switching shanks would be if you did not have enough drop with the stock shank only having...
    view full answer...

  • Blue Ox SwayPro Weight Distribution System For 2022 Cruiser RV Stryker 3313 Toy Hauler
  • Yes, the Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW2000 is the correct weight capacity for your 2022 Cruiser RV Stryker STG 3313 Toy Hauler. This hitch is rated for a tongue weight of 1,500-2,000lbs and a maximum trailer weight of 20,000lbs. Your Stryker has a dry tongue weight of 1,629lbs so you meet that specification with room to spare and are well below the max trailer weight with a GVWR of 12,800lbs.
    view full answer...

  • Dimensions Of Replacement Rung for Stromberg Carlson RV Exterior Ladder
  • The Replacement Rung for Stromberg Carlson RV Exterior Ladder measures 13-1/4" overall length. The diameter of the hole is 1". From the center of one of the holes to the other hole is 11-1/4" and the measurement between the holes is 10-1/4". From outside edge of one hole to the outside edge of the other is 11-3/4". The width of the rung itself is 2". I have attached a diagram for your reference. I am not sure which ladders are on the Grand Design or Cruiser but I have taken the dimensions...
    view full answer...